View Our Registration Certificate YOUR HEAVY DUTY TOGGLE CLAMP SUPPLIER! MADE IN THE USA

STRAIGHT LINE STYLE FEATURES

Both Round and Square Plungers
Push or Pull Action

C-130 Series Available in 3 sizes C-150 Series Available in 3 sizes C-140 Series Maximum Holding pressures 2500 - 10,000 pounds Weight of the clamps between .7 pounds and 6.6 pounds Regular and Long Stroke versions available All models feature Hardened Plungers

C-130 Series

The Wolverine Tool C-130 series is a round plunger, fast push action unit with straight line plunger motion. Ideal for precision locating and clamping, the plunger is tapped for standard bolt and withdraws flush with body block face in open position. Solid bar base permits easy welding into work position. Plunger guide hole is drilled and broached to close tolerance fit with accurately ground plunger. Hardened steel pins and bushings are used at important bearing points.

The C-130-A series is a low profile, round plunger, fast push action unit with straight line plunger motion, with identical design and quality construction as C-130. However, the A series has a plate base for drilling and bolting into work position instead of the plain bar base. Broached plunger guide hole and precision ground plunger plus hardened steel pins and bushings at important bearing points make this clamp ideal for accurate locating use.

C-150 Series

The C-150 series is a square plunger, fast push action unit with accurate straight line plunger motion. Plunger guide hole is accurately broached and the square plunger has a close tolerance fit. The square plunger affords greater bearing surface and permits easy attachment of auxiliary locating adapters. Plunger is tapped for standard bolt. Hardened steel pins and bushings are used at all important bearing points. This series has a bar base for welding into working position.

The C-150-A series is a square plunger, fast push action unit with accurate straight line motion identical to the C - 150 except that it has a sturdy plate base for drilling and bolting into working position. Positive radial location of the square plunger, much greater bearing surface of the plunger and the flat plunger adaptor surfaces make this unit a favorite for use where radial location is important.

Click here to view drawings of the C-131, C-131-A and the C-151, C-151-A Models

Click here to view drawings of the C-130, C-130-A and the C-150, C-150-A Models

Click here to view drawings of the C-132, C-132-A and the C-152, C-152-A Models

C-133 Series

The C-133 Series is for those who require a long stroke, push action toggle clamp.
If you need a round style plunger, the two models in the C-133 Series are accurate, sturdy, wide clearance and budget priced. Ideal for rugged production use in locating or clamping. Locks in extended position.

C-153 Series

In addition, we also offer the two models in C-153 Series for those who require an extra long stroke, square plunger, push action toggle clamp.

Click here to view drawings of the C-133/C-153 Series

C-140 Series

The C-140 Models are a fast, new, pull action toggle clamp that locks in retracted position. Ideal for use where parts are to be pulled into position against a locating face.

Click here to view drawings of the C-140/C-140-A Series

Need something different? Wolverine Tool also designs and builds special clamps to your specifications. We invite you to contact us so we may be of service in helping you solve your clamping problems. With a reputation for quality, personalized service and an eye toward the future since 1926, Wolverine Tool is a name you can trust.